Friday, June 26, 2026
Saturday, March 1, 2014
The Physics of Skiing
| Image from: uk.eurosport.yahoo.com Credit: Reuters |
It was evident that we have energy transformation (from potential to kinetics):
"As the skier begins the descent down the hill, potential energy is lost and kinetic energy (i.e., energy of motion) is gained. As the skier loses height (and thus loses potential energy), she gains speed (and thus gains kinetic energy). Once the skier reaches the bottom of the hill, her height reaches a value of 0 meters, indicating a total depletion of her potential energy. At this point, her speed and kinetic energy have reached a maximum. This energy state is maintained until the skier meets a section of unpacked snow and skids to a stop under the force of friction. The friction force, sometimes known as a dissipative force, does work upon the skier in order to decrease her total mechanical energy. Thus, as the force of friction acts over an increasing distance, the quantity of work increases and the mechanical energy of the skier is gradually dissipated. Ultimately, the skier runs out of energy and comes to a rest position. Work done by an external force (friction) has served to change the total mechanical energy of the skier." (in Physics Classroom)The NSF has a great video about this topic:
I found that all the materials must be design to support bumps and torsion:
"Ski materials have received an equally extensive makeover. Engineers are continually working to make skis lighter and more flexible to absorb bumps in the snow, while keeping them rigid enough to hold their shape during turns. For that reason, metal skis were introduced in the 1950s. Today’s skis, because of their broader tips and tails, have to endure torsional forces that skis of the past could not have withstood. Most skis are now made of sandwiches of fiberglass, wood, aluminum alloys, glue, and polymers." (in Discover Magazine)
"A skier maximizes his speed by minimizing resistance to motion, both from air resistance and snow resistance. A skier minimizes his air resistance (drag) by reducing his projected frontal area. He does this by going into a crouch position, which (along with improving his ability to hold balance) results in a lower drag force, which acts in a direction opposite his velocity, slowing him down. The picture below shows a downhill skier in a crouch position." (in Real World Physics Problems)

"To prevent slipping, the angle ψ must be greater than or equal to 90° . This means that the component of FR parallel to the plane of the ski, will either be zero (for ψ = 90°), or it will point directly into the snow, towards the right (for ψ > 90°), and the "wall" of snow will prevent it from slipping." (in Real World Physics Problems)
What a great sport!
Wednesday, January 9, 2013
How to Win a Bike Race: Using Gears
- Bicycle and motorcycle dynamics is the science of the motion of bicycles and motorcycles and their components, due to the forces acting on them. Dynamics is a branch of classical mechanics, which in turn is a branch of physics. Bike motions of interest include balancing, steering, braking, accelerating, suspension activation, and vibration. The study of these motions began in the late 19th century and continues today.
- Physics and Bicycling, with papers and calculus made with MathCad.
- Berkeley University paper.
Saturday, July 28, 2012
Thursday, June 30, 2011
Baseball cheaters and the law of Physics
Some baseball superstitions are accepted as cold, hard truth. But in the world of physics, the most accepted verities are subject to experimentation.
download the paper in PhysOrg.
Sunday, March 7, 2010
The Physics of Curling
English version:
scienceblogs.com by Matt Springer

Versão Portuguesa:
(Tradução do artigo original indicado em cima)
O curling é um desporto cujo objectivo, no final de cada rodada, é colocar as pedras o mais próximo possível do centro do ringue. Do ponto de lançamento até o centro do anel é de cerca de 97 pés (29,56 m). O atrito com o gelo, leva a pedra a parar nesse espaço. Por que não estimar a quantidade de atrito do gelo contra a pedra?
O atrito é intrinsecamente um fenómeno muito complexo, mas é frequentemente uma boa aproximação dizer que é uma força no sentido oposto do movimento, com uma magnitude proporcional à força da superfície sobre o objecto – igual à força da gravidade, no presente caso. Geralmente chamada de força "normal", porque normal, neste contexto, significa "perpendicular", i.e. a força é perpendicular à superfície onde se movimenta a pedra. A relação entre essas duas forças (força de atrito e a força normal) é o coeficiente de atrito.
Assim, podemos escrever a equação que descreve a força de atrito:

Onde mu grego é o coeficiente de atrito, e a massa m da pedra vezes a aceleração da gravidade g é a força normal. Sabemos também, porque usamos tantas vezes, que um objecto em movimento acelerado a 1D obedece as equações padrão de movimento acelerado:

e

Aqui d é a distância de viagem da pedra, t é o tempo que leva a pedra a completar a sua viagem, a é a aceleração devido ao atrito, v0 é a velocidade inicial. Quando a pedra termina a sua viagem a velocidade será 0, daí o 0 para a velocidade final na última equação. Sabemos que a força é igual à massa vezes aceleração, deste modo a aceleração devido ao atrito será a força de atrito dividida pela massa: a = - μ * g.
Mas não se sabe a velocidade inicial. Não temos nenhuma forma de medir isso. Mas temos o tempo total da viagem. Se ouvirmos os comentadores, 24 segundos ou mais é uma linha típica de tempo “Hog line to tee line”. A partir daí, pode-se manipular algebricamente as equações para eliminar a velocidade inicial e resolver o coeficiente de atrito:
Como esperado, quanto mais uma pedra leva a percorrer uma determinada distância, menor o atrito. O curling usa unidades do Sistema Inglês, assim com g = 32 pés / s ^ 2, d = 97 metros, e t = 24 segundos, calculando tem-se μ = 0,011. Este é um valor extremamente pequeno de atrito, menor do que em teflon vs teflon. Pode ser que a aproximação que fizemos para atrito não é tão grande, ou pode ser que o granito no gelo tem um pequeno coeficiente de atrito.
Featured Post
IBSE about Light Pollution
Here is my presentation that happened in the Discover the Cosmos Conference (Volos, Greece - 2013). The presentation was an Inquiry Base...
Popular Posts
-
An artist's conception of a quasar, with a Chandra X-ray Observatory image of the quasar GB1508+5714 inset. The data reveal a jet of h...
-
X-radiation (composed of X-rays ) is a form of electromagnetic radiation . X-rays have a wavelength in the range of 10 to 0.01 nanomet...
-
Observed and expected exclusion limits for a Standard Model Higgs boson at the 95-percent confidence level for the combined CDF and DZero ...
-
The Moon is the only natural satellite of the Earth , and the fifth largest satellite in the Solar System . It is the largest na...


